|
Complete Giant Sarcomere Model by Denoyer-Geppert
|
|
Deluxe Muscle Arm, 6 part, Life Size
|
|
Muscle Arm, 6 part, 3/4 Life Size
|
|
Muscular Figure, 1/4 life size, 2 part
|
Retail Price $1,068.95 Today's Online Price $1,004.81 You save $64.14!
(1)
|
|
|
Retail Price $1,035.00 Today's Online Price $879.75 You save $155.25!
|
|
|
Retail Price $542.00 Today's Online Price $460.70 You save $81.30!
(1)
|
|
|
Retail Price $655.00 Today's Online Price $556.75 You save $98.25!
|
|
|
|
|
|
|
|
Complete Sarcomere ModelRepresenting complete sarcomere the smallest functional unit of myofibri
|
Deluxe Muscle Arm, 6 part, Life Size
The following muscles can be detached in this life-size muscula
|
Muscle Arm, 6 part, 3/4 Life Size
This muscled arm model illustrates both the superficial and deepe
|
The mini muscle model has (57 cm) strength is in its value. All the superficial muscular of the huma
|
|
|
|
Muscle Leg, 9 part, 3/4 Life Size
|
|
Deluxe Muscle Leg Model, 7 part, Life Size
|
|
Lower Muscle Leg Model with detachable Knee, 3 part, Life Size
|
|
Complete Female Muscular Figure Model, 21 part
|
Retail Price $809.00 Today's Online Price $687.65 You save $121.35!
|
|
|
Retail Price $1,495.00 Today's Online Price $1,270.75 You save $224.25!
|
|
|
Retail Price $889.00 Today's Online Price $755.65 You save $133.35!
|
|
|
Retail Price $3,268.00 Today's Online Price $2,777.80 You save $490.20!
|
|
|
|
|
|
|
Muscle Leg, 9 part, 3/4 Life Size
The muscular leg model illustrates both the superficial and deepe
|
Deluxe Muscle Leg, 7 part, Life Size
This life-size muscular leg model can be disassembled into upp
|
Lower Muscle Leg Model with detachable Knee, 3 part, Life Size
Muscled leg is a life-sized replica
|
The human anatomy in a convenient size. This 84 cm high human muscular figure is perfect for demons
|
|
|
|
Internal Hand Structure Model, 3 part
|
|
Internal Finger Structure Model
|
|
Normal foot model
|
|
Flat Foot Model (Pes Planus)
|
Retail Price $440.00 Today's Online Price $374.00 You save $66.00!
|
|
|
Retail Price $135.00 Today's Online Price $114.75 You save $20.25!
|
|
|
Retail Price $97.00 Today's Online Price $82.45 You save $14.55!
|
|
|
Retail Price $97.00 Today's Online Price $82.45 You save $14.55!
|
|
|
|
|
|
|
|
This life size hand model shows the superficial and internal structures of the human hand, including
|
This full-size model shows the bones, muscles and tendons of the human middle finger. Delivered on a
|
Superficial structures of the human foot are shown in this high quality model. The internal bones, m
|
Superficial structures of a flat foot are shown. The internal bones, muscles, ligaments and nerves a
|
|
|
|
Hollow Foot Model (Pes Cavus)
|
|
Numbered Muscle Leg Model, 9 part
|
|
Numbered Nervous System Model
|
|
Cutaway Osteoporosis
|
Retail Price $97.00 Today's Online Price $82.45 You save $14.55!
|
|
|
Retail Price $544.00 Today's Online Price $495.04 You save $48.96!
|
|
|
Retail Price $192.00 Today's Online Price $174.72 You save $17.28!
|
|
|
Retail Price $55.00 Today's Online Price $48.40 You save $6.60!
|
|
|
|
|
|
|
|
Superficial structures of a hollow foot are shown. The internal bones, muscles, ligaments and nerves
|
Model showing all muscles, tendons, nerves, blood vessels and bones of the leg
|
Model of nervous system helps in studying general view of the peripheral
|
Consist of 3 medially divided lumbar vertebrae with intervertebral discs. For comparison, the upper section shows healthy bone structure, the middle section shows osteoporotic bone structure and the lower section shows advanced osteoporotic bone structure with flattened plates, deformation and decreased mass. On stand.
|
|
|
|
Lumbar Vertebrae with Sacrum & Coccyx and Herniated Disc
|
|
ORTHObones Standard Humerus, left
|
|
ORTHObones Standard Radius, left
|
|
ORTHObones Standard Cervical Vertebrae
|
Retail Price $199.00 Today's Online Price $125.12 You save $73.88!
|
|
|
|
|
|
|
|
|
|
|
Consist of the 5 lumbar vertebrae with intervertebral discs, sacrum with flap, coccyx, spinal nerves and dura mater of spinal cord. On stand
|
In addition to the well-known ORTHObones
PREMIUM, the high-quality training bone, this 3B Scientific model is an alternative, for your workshops. Our
workshop bones meet the following requirements:
• Anatomically accurate
• Realistic haptics
• Simple handling
• Two-component structure
• Excellent results
• Fantastic value for money
The new ORTHObones STANDARD have a hard cortical bone and softer, spongy bone (spongiosa).
The two-component structure ensures particularly realistic haptics and appearance of these workshop bones.
The surface of the ORTHObones STANDARD is not as rigid as that of
ORTHObones PREMIUM and is therefore more suitable for carrying out
medullary nailing, for example. Overall, mechanically manipulating the
new ORTHObones STANDARD is easier.
In workshops in which basic skills or surgical methods and correct
handling of implants are ofparticular importance, the benefi ts of
ORTHObones STANDARD are particularly evident. Furthermore, ORTHObones
STANDARD are anatomically accurate, making them a cost-eff ective
alternative to traditional demonstration models.
AREAS OF APPLICATION
As a surgeon or orthopedist, the 3B Scientific® ORTHObones will enable you to optimise your skills.
Practise new techniques to perfection, and regularly test your ability
to carry out common techniques. Regardless of whether you specialise in
fractures to arms or legs, maxillofacial surgery or pelvic implants,
ORTHObones STANDARD offer a cost-effective and anatomically correct
range of workshop bones. You will be perfectly prepared for treating
your patients!
Manufacturers of medical implants, endoprostheses and similar products
can also take advantage of ORTHObones STANDARD in a range of ways.
First, you can test and optimise the ORTHObones STANDARD during the
development phase, at low cost. Second, workshop and presentation
participants will see how your products behave in realistic situations
and will get a feel for how they can be used.
|
In addition to the well-known ORTHObones
PREMIUM, the high-quality training bone, this 3B Scientific model is an alternative, for your workshops. Our
workshop bones meet the following requirements:
• Anatomically accurate
• Realistic haptics
• Simple handling
• Two-component structure
• Excellent results
• Fantastic value for money
The new ORTHObones STANDARD have a hard cortical bone and softer, spongy bone (spongiosa).
The two-component structure ensures particularly realistic haptics and appearance of these workshop bones.
The surface of the ORTHObones STANDARD is not as rigid as that of
ORTHObones PREMIUM and is therefore more suitable for carrying out
medullary nailing, for example. Overall, mechanically manipulating the
new ORTHObones STANDARD is easier.
In workshops in which basic skills or surgical methods and correct
handling of implants are ofparticular importance, the benefi ts of
ORTHObones STANDARD are particularly evident. Furthermore, ORTHObones
STANDARD are anatomically accurate, making them a cost-eff ective
alternative to traditional demonstration models.
AREAS OF APPLICATION
As a surgeon or orthopedist, the 3B Scientific® ORTHObones will enable you to optimise your skills.
Practise new techniques to perfection, and regularly test your ability
to carry out common techniques. Regardless of whether you specialise in
fractures to arms or legs, maxillofacial surgery or pelvic implants,
ORTHObones STANDARD offer a cost-effective and anatomically correct
range of workshop bones. You will be perfectly prepared for treating
your patients!
Manufacturers of medical implants, endoprostheses and similar products
can also take advantage of ORTHObones STANDARD in a range of ways.
First, you can test and optimise the ORTHObones STANDARD during the
development phase, at low cost. Second, workshop and presentation
participants will see how your products behave in realistic situations
and will get a feel for how they can be used.
|
In addition to the well-known ORTHObones
PREMIUM, the high-quality training bone,this 3B Scientific model is an alternative, for your workshops. Our
workshop bones meet the following requirements:
• Anatomically accurate
• Realistic haptics
• Simple handling
• Two-component structure
• Excellent results
• Fantastic value for money
The new ORTHObones STANDARD have a hard cortical bone and softer, spongy bone (spongiosa).
The two-component structure ensures particularly realistic haptics and appearance of these workshop bones.
The surface of the ORTHObones STANDARD is not as rigid as that of
ORTHObones PREMIUM and is therefore more suitable for carrying out
medullary nailing, for example. Overall, mechanically manipulating the
new ORTHObones STANDARD is easier.
In workshops in which basic skills or surgical methods and correct
handling of implants are ofparticular importance, the benefi ts of
ORTHObones STANDARD are particularly evident. Furthermore, ORTHObones
STANDARD are anatomically accurate, making them a cost-eff ective
alternative to traditional demonstration models.
AREAS OF APPLICATION
As a surgeon or orthopedist, the 3B Scientific® ORTHObones will enable you to optimise your skills.
Practise new techniques to perfection, and regularly test your ability
to carry out common techniques. Regardless of whether you specialise in
fractures to arms or legs, maxillofacial surgery or pelvic implants,
ORTHObones STANDARD offer a cost-effective and anatomically correct
range of workshop bones. You will be perfectly prepared for treating
your patients!
Manufacturers of medical implants, endoprostheses and similar products
can also take advantage of ORTHObones STANDARD in a range of ways.
First, you can test and optimise the ORTHObones STANDARD during the
development phase, at low cost. Second, workshop and presentation
participants will see how your products behave in realistic situations
and will get a feel for how they can be used.
|
|
|
|
ORTHObones Standard Hand
|
|
ORTHObones Std. Foot w/ Hammertoe, Bunions and Heel
|
|
ORTHOBone Block 15 PCF - CP1
|
|
ORTHOBone Block 20 PCF - CP1
|
|
|
|
|
|
|
|
|
|
In addition to the well-known ORTHObones
PREMIUM, the high-quality training bone, this 3B Scientific model is an alternative, for your workshops. Our
workshop bones meet the following requirements:
• Anatomically accurate
• Realistic haptics
• Simple handling
• Two-component structure
• Excellent results
• Fantastic value for money
The new ORTHObones STANDARD have a hard cortical bone and softer, spongy bone (spongiosa).
The two-component structure ensures particularly realistic haptics and appearance of these workshop bones.
The surface of the ORTHObones STANDARD is not as rigid as that of
ORTHObones PREMIUM and is therefore more suitable for carrying out
medullary nailing, for example. Overall, mechanically manipulating the
new ORTHObones STANDARD is easier.
In workshops in which basic skills or surgical methods and correct
handling of implants are ofparticular importance, the benefi ts of
ORTHObones STANDARD are particularly evident. Furthermore, ORTHObones
STANDARD are anatomically accurate, making them a cost-eff ective
alternative to traditional demonstration models.
AREAS OF APPLICATION
As a surgeon or orthopedist, the 3B Scientific® ORTHObones will enable you to optimise your skills.
Practise new techniques to perfection, and regularly test your ability
to carry out common techniques. Regardless of whether you specialise in
fractures to arms or legs, maxillofacial surgery or pelvic implants,
ORTHObones STANDARD offer a cost-effective and anatomically correct
range of workshop bones. You will be perfectly prepared for treating
your patients!
Manufacturers of medical implants, endoprostheses and similar products
can also take advantage of ORTHObones STANDARD in a range of ways.
First, you can test and optimise the ORTHObones STANDARD during the
development phase, at low cost. Second, workshop and presentation
participants will see how your products behave in realistic situations
and will get a feel for how they can be used.
|
In addition to the well-known ORTHObones
PREMIUM, the high-quality training bone, this 3B Scientific model is an alternative, for your workshops. Our
workshop bones meet the following requirements:
• Anatomically accurate
• Realistic haptics
• Simple handling
• Two-component structure
• Excellent results
• Fantastic value for money
The new ORTHObones STANDARD have a hard cortical bone and softer, spongy bone (spongiosa).
The two-component structure ensures particularly realistic haptics and appearance of these workshop bones.
The surface of the ORTHObones STANDARD is not as rigid as that of
ORTHObones PREMIUM and is therefore more suitable for carrying out
medullary nailing, for example. Overall, mechanically manipulating the
new ORTHObones STANDARD is easier.
In workshops in which basic skills or surgical methods and correct
handling of implants are ofparticular importance, the benefi ts of
ORTHObones STANDARD are particularly evident. Furthermore, ORTHObones
STANDARD are anatomically accurate, making them a cost-eff ective
alternative to traditional demonstration models.
AREAS OF APPLICATION
As a surgeon or orthopedist, the 3B Scientific® ORTHObones will enable you to optimise your skills.
Practise new techniques to perfection, and regularly test your ability
to carry out common techniques. Regardless of whether you specialise in
fractures to arms or legs, maxillofacial surgery or pelvic implants,
ORTHObones STANDARD offer a cost-effective and anatomically correct
range of workshop bones. You will be perfectly prepared for treating
your patients!
Manufacturers of medical implants, endoprostheses and similar products
can also take advantage of ORTHObones STANDARD in a range of ways.
First, you can test and optimise the ORTHObones STANDARD during the
development phase, at low cost. Second, workshop and presentation
participants will see how your products behave in realistic situations
and will get a feel for how they can be used.
|
3B Biomechanical Test Blocks
-
Use to test implants and devices
-
Train the evaluation of bone density
-
Simulate different sets of characteristics, i. e. bone density and cortical thickness
Bone density: 10 – 30 PCF (Pounds per Cubic Foot)
The solid rigid polyurethane foam is available in 4 different densities: 10, 15, 20 and 30 PCF.
Cortical thickness: 1 – 3 mm
The cortical shell is simulated by a dense plate on top of each block.
Its density is 40 PCF and three different thicknesses (1, 2 or 3 mm) are
available for each foam density option.
Dimensions:
CP1: 1 mm cortical thickness: 9.5 x 4.5 x 3.1 cm
CP2: 2 mm cortical thickness: 9.5 x 4.5 x 3.2 cm
CP3: 3 mm cortical thickness: 9.5 x 4.5 x 3.3 cm
|
3B Biomechanical Test Blocks
-
Use to test implants and devices
-
Train the evaluation of bone density
-
Simulate different sets of characteristics, i. e. bone density and cortical thickness
Bone density: 10 – 30 PCF (Pounds per Cubic Foot)
The solid rigid polyurethane foam is available in 4 different densities: 10, 15, 20 and 30 PCF.
Cortical thickness: 1 – 3 mm
The cortical shell is simulated by a dense plate on top of each block.
Its density is 40 PCF and three different thicknesses (1, 2 or 3 mm) are
available for each foam density option.
Dimensions:
CP1: 1 mm cortical thickness: 9.5 x 4.5 x 3.1 cm
CP2: 2 mm cortical thickness: 9.5 x 4.5 x 3.2 cm
CP3: 3 mm cortical thickness: 9.5 x 4.5 x 3.3 cm
|
|
|
